How down quilt comforter made?

1. Fabric spreading and cutting
2. Piping, seam allowance, stitching.
3. Down filling
4. Quilting (baffle box comforter do not need)
5. Check and examine
6. Packing
 
Cut through the process: the quilt pave fixed Quilting (quilting machines) on, so that uniform distribution of the filler, cut through the set parameters (e.g. 4 * 4,7 * 7) cut through the sewing line refers directly to the upper and lower layers of the quilt stitching, securing a production process filler. Due to cut through two layers of fabric directly to the suture, and therefore better able to prevent displacement of the filler, so as to effectively ensure that the original properties of the quilt. However, due to the process, cut through the production process in general can not be thick quilt, but can basically meet the requirements of the fall and winter is.
Quilting size, needle speed, pitch, pattern, etc. Feel free to add adjustable. Automatic memory return, automatic repair functions. The machine can be customized to user needs a variety of sizes.
 
Lining Process: 12-13 stitches per inch stitch, seam 1cm, the needles and stitches to pin down. Li lining means burs first plurality of horizontal, vertical strips sewn on the inside of the fabric of the upper and lower layers of fabric, and then the two layers of fabric and lining stand a productive work carried out after the red velvet stitching process. Complete with stand quilt lining production process, due to the presence of vertical lining, will obviously there is a certain distance between the upper and lower layers of fabric, namely for the legislature strip height (1 inch). Three-dimensional quilt lining legislation obvious and relatively thick, typically dominated by winter.
 
1. Hot style: according to quilt size (number of cells) to split each grid, the greater the number, the better general lattice workers do better.
2. Seam Network (run lining): baffle box quilt essentially means net lining between two pieces of fabric, and according to the height of the quilt to use three-dimensional network
3. Notch: that charge according to customer requirements to cut the burr size
4. Trim: immediately after lining trim (original cloth trim, ribbon trim, German-style trim, satin piping, etc.). If the spigot is clear we do not need this process. Do not forget spiked.
5. Fight lining and flip: refers to turn over the upper and lower rear trim piece inside the net lining together. And each sew a wide grid lining is to stand to turn over.
6. Double stitch: 0.1+0.3cm, 0.1+0.6cm
7. Down filling, usually filling nozzle diameter 5cm
8. Sealing
 
Double stitches: two parallel stitching at the spigot edge stitching quilt. Outside a port stop and edge distance 0.1cm, inside and outside spigot distance 0.3cm.
 
Inspection: Inspection wireless head, floating line, stains, cloth defect, breakage, jump yarn, needle, the appearance of differences.
 
Packing: polyethylene bags + waterproof + carton

Our down quilt comforter filling machine with automatic weighing system.